«WORKSMAN PERSONAL ACTIVITY VEHICLE ASSEMBLY INSTRUCTIONS AND PARTS LIST th Worksman Trading Corp - 94-15 100 Street - Ozone Park, NY 11416 - (888) ...»
WORKSMAN PERSONAL ACTIVITY VEHICLE ASSEMBLY INSTRUCTIONS AND PARTS LIST
Worksman Trading Corp - 94-15 100 Street - Ozone Park, NY 11416 - (888) 3-WHEELER or 718 322 2000 – www.worksman.com
Parts list PAV3-04
Worksman PAV3™- A Tricycle Revolution
Congratulations! You have purchased an American Made Worksman
Personal Activity Vehicle™ Comfort Tricycle. The PAV3™ is one of
the most unique adult tricycles in the world. It combines comfort with durability, a true unique combination. We utilize the components and technology used on our world famous Worksman Industrial Cycles on the Personal Activity Vehicle.
Before assembly and riding, make certain to read this manual and any other literature provided thoroughly. Always follow the rules of safe riding. Always keep your PAV3™ Tricycle in tip-top shape by replacing worn parts as needed with Genuine Worksman Cycles Parts. (Do not use generic bicycle parts.) With simple maintenance, your Worksman Tricycle will perform reliably day after day, year after year, decade after decade.
Your Personal Activity Vehicle™ Tricycle has been hand-made in the USA by our American craftspeople. Our reputation rides along with you, so your ultimate satisfaction is our goal.
Worksman PAV3™ Parts List PAV3-04 Frame, Fork and Related Parts Part # Description Part # Description 72PAV PAV3 Frame Only- Specify color 5020HD Fork-Color Black 5020HD-SP Fork (other color- please specify 48 Head Set Cups (pair) 49 Headset Bearings (pair) 50A Headset Complete (48,49,52,53,54) 51 Bottom Cone (presses on Fork) 52 Top Adjusting Cone (threaded) 53 Key Washer 54 Fork Top Lock nut 55PAV Tiller Handlebar 55U Stem for Handlebar 55Y Foam Handlebar Grips (set) 3928PAV Basket frame support 60STR Drum Brake Fork Strap Front Wheel and Related Parts Part # Description Part # Description 7720A Front Wheel 20” w/Drum Brake w/o tire 7720 Front Wheel20” w/Drum Brake w/air tire L900 Drum Brake-Hub Only L709 Front Axle Set for Drum Brake L752R
M13966 Axle w/301M Coaster M13975 Axle Bearing w/Plate Brake, 69 Sprocket and 4914XX Chain
ASSEMBLY INSTRUCTIONS FOR THE WORKSMAN PERSONAL ACTIVITY VEHICLE™ TRICYCLE:
Your Worksman PAV3™ Industrial Tricycle has been hand made by American craftspeople at our Ozone Park, New York City factory.
We take great pride in each and every Worksman Cycle that we manufacture and appreciate your support. Please read this manual carefully prior to performing the simple finishing adjustments and prior to riding. Keep these instructions, as our parts list is contained within this document which you will need for future reference. Carefully remove the tricycle from the carton. You will notice the tricycle is pre-assembled at the factory. Some finishing assembly / adjustments required.
ADJUSTING THE HIGH BACK CAPTAIN’S SEAT:
Your PAV3 Tricycle comes with a thickly padded captain’s seat. Simply position the seat on the sliding seat track, insert the large round washer onto the “T” Tightening Bolt, and thread the “T” bolt into the bottom of the seat. Slide the seat to a comfortable position where leg is ever so slightly bent at the knee when reaching for the pedal in its furthest position. Tighten the bolt so seat is secure and no longer slides across the track. Remember to always check tightness of seat before riding. If you ordered the swivel down armrests, once seated, rotate armrests to down position.
Your Personal Activity Vehicle comes with a unique steering tiller. This tiller can be positioned for your own riding preference. The stem is not tightened at the factory so you can set it where you desire by simple lifting the tiller to a comfortable position and tightening the stem using a #5 Allen key. Make certain the stem is tight and the tiller remains in place even while exerting downward pressure.
Coaster Brake: Foot activated coaster brakes are easy to use and reliable. To activate this internal brake, reverse the pedaling motion until the brake engages. To avoid skidding and maintain control, apply care when braking. This is especially true on wet surfaces. Apply brakes gently, gradually increasing pedal back pressure. Replace coaster brakes when they become worn.
Check chain tension regularly. Models that are ordered with 3 Speed coaster brakes, the operation is the same,. Simply select the gear you wish to ride in. First gear is for easier starts and low speed riding. As you changed to gear 2 and 3 you will note that pedaling effort increases as does distance traveled with each turn of the crank.
Tires: Always check for worn or damaged tires. The Worksman Sup-r-tires are heavy duty. We recommend 40PSI as proper level of inflation.
Replace tires that are worn or cut immediately. Replace tubes that show leaks.
RULES FOR SAFE RIDING AND RESPONSIBLE OPERATION: Carefully read this manual before operating the cycle.
• It is the responsibility of the assembler to properly install all parts included and to inspect the cycle prior to riding to insure proper operation.
• Operator is responsible for required maintenance to keep the cycle in good operation condition
• Observe all traffic regulations in the operating environment (stop signs, etc.) Keep to the right and in a straight line. Ride in single file.
• Do not ride outdoors, at night. Have appropriate signaling device as needed. (We recommend the 3973 Mega Horn)
• Give Pedestrians the Right of Way. Always look around you to understand the riding environment and hazards.
• Do not carry passengers. Check brakes prior to riding
• Slow down when approaching turns or intersections. Tricycles are meant for slow pace rides, not for racing.
• Use proper hand signals when turning or stopping. Recommended Safety Options: Approved helmet, audible warning device.
• Never ride the cycle if there are known repairs required. Do not exceed the recommended weight capacity of the cycle
• Do not stack cargo too high in basket and always secure cargo with appropriate tie down straps.
• Wipe surface of cycle clean and dry when exposed to corrosive substances or environment.
• Operate Cycle at slow speeds, particularly in high traffic areas
• Operators of cycles should be in good physical condition. Ride at your own risk.
• Wear proper riding attire. Check shoelaces prior to riding so they do not become engaged in the chain and sprocket.
• Ride only on smooth, paved surfaces. Do not use off road. Do not ride on steep grades…designed for relatively flat roads.
• Do not operate a tricycle on steep grades. They are designed for relatively level, paved surfaces only.
• Always replace worn parts with genuine Worksman Cycle Repair Parts. Keep a maintenance log for your records.
• Always keep both hands on the handlebars. Tricycles have a tendency to pull slightly to one side.
• If motorized, buyer responsible for meeting local laws relating to motorized vehicles and viability of operation.
THIS CYCLE IS WARRANTED AGAINST FAULTY PARTS UNER THE FOLLOWING CONDITIONS: THIS WARRANTY DOES NOT COVER ANY FAILURE DUE TO ACCIDENT, ABUSE, MISUSE,
NEGLECT OR AS THE RESULT OF NORMAL WEAR AND TEAR, OR IMPROPER ASSEMBLY. THE ENTIRE FRAME INCLUDING ALL WELDED JOINTS IS WARRANTED TO BE FREE FROM
DEFECTS AND MATERIAL FOR ONE YEAR WHILE IN POSSESSION OF THE ORIGINAL PURCHASER. ALL OTHER PARTS ON THIS CYCLE EXCEPT TIRES AND TUBES IS WARRANTED FOR
NINETY DAYS FROM THE DATE OF PURCHASE. REPAIR AND REPLACEMENT OF THESE PARTS IS TO BE ACCORDING THE WORKSMAN CYCLES PARTS AND SERVICE PROCEDURES
AND MUST BE HANDLED DIRECTLY THROUGH THE SOURCE WHERE THE CYCLE WAS PURCHASED. IF UPON EXAMINATION OF THE PARTS IN QUESTION, THE WORKSMAN CYCLE
DEALER DETERMINES THAT IT IS DEFECTIVE, EAITHER REPAIR OR REPLACEMENT WILL BE MADE AT NO COST EXCEPT THE COST OF TRANSPORTATION AND LABOR CHARGES (IF
ANY). UNAUTHORIZED REPAIRS OR REPLACEMENT AUTOMATICALLY VOIDS WARRANTY. PROPER MAINTENANCE IS REQUIRED FOR WARRANTY TO BE VALID. IN THE EVENT THAT IT
WAS DETERMINED THAT THE WARRANTY CLAIM IS THE RESULT OF MISUSE, ABUSE, IMPROPER MAINTENANCE OR SIMPLY NOT DEFECTIVE OR BEYOND THE WARRANTY PERIOD,
WORKSMAN CYCLES OR THE DEALER WILL ADVISE YOU AS TO THE COST OF REPAIR, REPLACEMENT OR LABOR PRIOR TO PERFORMING ANY WORK OR REPLACING ANY PARTS. IF
YOU CHOSE NOT TO HAVE THE DEALER OR WORKSMAN CYCLES PERFORM THE WORK, THE PARTS WILL BE RETURNED TO YOU AT YOUR EXPENSE OR DISCARDED IF NO REPLY IS
RECEIVED WITHIN 2 WEEKS OF NOTICIATION. THE SOLE RESPONSBILITY OF THE MANUFACTURER TO THE TERMS OF THIS WEARRANTY, IF ANY, SHALL BE THE REPAIR AND OR
REPLACEMENT OF THE PARTS AS INDICATED ABOVE. THE LIABILITY OF THE MANUFACTURER SHALL IN NO EVENT EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT AND
THE MANUFACTURER SHALL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING, BUT NOT BY WAY OF LIMITATION, DAMAGES FOR
PERSONAL INJURY OR PROPERTY.THIS STATEMENT CONSTITUTES THE EXCLUSIVE EXPRESSION OF WARRANTIES BY THE MANUFACTURER AND IS IN LIEU OF ANY OR ALL OTHER
WARRANTIES SUCH AS EXPRESSED WARRANTIES, IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, AND FITNESS OR PURPOSE., ARE
LIMITED IN DURATION FOR ONE YEAR FROM THE DATE OF PURCHASE O THE FRAME ONLY AND 90 DAYS FOR ALL OTHER PARTS, EXEPT TIRES AND TUBES WHICH ARE NOT
WARRANTED. WORKSMAN TRADING CORPORATION IS THE MANUFACTURER. MISUSE OF THE CYCLES INCLUDING OFF ROAD RIDING, INSTALLATION OF MOTORS OR POWER
ASSISTS, ALTERATIONS, REPAIRS USING PARTS OTHER THAN GENUINE WORKSMAN CYCLE PARTS VOIDS WARRANTY. WORKSMAN TRADING CORPORATION IS NOT RESPONSIBLE
FOR MAINTAINING RECORDS OF SERIAL NUMBERS. VOID WHERE PROHIBITED BY STATE LAW.
FAX THIS COMPLETED REGISTRATION FORM TO 718 529 4803 OR MAIL TO WORKSMAN:
Name of Purchaser________________________________ Company Name___________________________________
Tel__________________________ Fax __________________________e-mail ___________________________________
Date of Purchase__________________________ Dealer name________________________________________________
Address of Dealer_____________________________________________________________________________________
Serial Number (located under crank housing)_________________________ Color_______________________
SIGNATURE _____________________________________________ DATE______________________________