WWW.DISSERTATION.XLIBX.INFO
FREE ELECTRONIC LIBRARY - Dissertations, online materials
 
<< HOME
CONTACTS



Pages:   || 2 |

«Specification Sheet.027 x 11 ¾” – Gutter Coil.027 x 11 7/8” – Gutter Coil 5K.027” Aluminum Gutter Listed below are the specifications ...»

-- [ Page 1 ] --

Specification Sheet

.027 x 11 ¾” – Gutter Coil

.027 x 11 7/8” – Gutter Coil

5K.027” Aluminum Gutter

Listed below are the specifications on the paint, metal preparation, and finished coating for aluminum gutter

coil.

 The aluminum used is alloy 3105-H24which meets the specifications set forth in the “Aluminum Standards

and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the gutter is.027,

plus or minus.002.

 The surface of the aluminum sheet is thoroughly cleaned and dried to remove residual oils and impurities using a 140°F-160°F hot water solution of potassium hydroxide provided by Henkel Surface Technologies and then applying a chromate or titanium base conversion coating, 1402W or 1455SF by Henkel Surface Technologies.

 A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating.

The reverse side of the coil, or wash coat, is a thermo setting polyester enamel applied to help resist corrosion and promote formability.

 The color range of the applied finish is.8 mils, plus or minus.2 mils (1.0)  Made in the USA  The physical test used on our coated panels includes:

180 degree-2T bend flex test no tape off using Scotch Brand #610 tape (ASTM D-4145-83) Reverse impact –2 lbs./mil no tape off in positive direction using Scotch Brand #610 tape (ASTM D-4146-83) Pencil Hardness-F minimum using Eagle Turquoise Brand pencil (ASTM D-3363-92A) M.E.K. resistance - 100 double rubs using cheesecloth-mesh size 28 x 24 (ASTM D-5402-92) Dry Heat flexibility – no tape off on 2T bend after 2minutes at 160 degrees F Profile 5” K style gutter Specification Sheet.032 x 11 ¾ ” – Aluminum Gutter Coil 5K Aluminum Gutter Listed below are the specifications on the paint, metal preparation, and finished coating for aluminum gutter coil.

 The aluminum used is alloy 3105-H24 which meets the specifications set forth in the “Aluminum Standards and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the gutter is.032, plus or minus.002.

 The surface of the aluminum sheet is thoroughly cleaned and dried to remove The surface of the aluminum sheet is thoroughly cleaned and dried to remove residual oils and impurities using a 140°F-160°F hot water solution of potassium hydroxide provided by Henkel Surface Technologies and then applying a chromate or titanium base conversion coating, 1402W or 1455SF by Henkel Surface Technologies.

 A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating.

The reverse side of the coil, or wash coat, is a thermo setting polyester enamel applied to help resist corrosion and promote formability.

 The color range of the applied finish is.8 mils, plus or minus.2 mils (1.0)  Made in the USA  The physical test used on our coated panels includes:

180 degree-2T bend flex test no tape off using Scotch Brand #610 tape (ASTM D-4145-83) Reverse impact –2 lbs./mil no tape off in positive direction using Scotch Brand #610 tape (ASTM D-4146-83) Pencil Hardness-F minimum using Eagle Turquoise Brand pencil (ASTM D-3363-92A) M.E.K. resistance - 100 double rubs using cheesecloth-mesh size 28 x 24 (ASTM D-5402-92) Dry Heat flexibility – no tape off on 2T bend after 2minutes at 160 degrees F

–  –  –

Listed below are the specifications on the paint, metal preparation, and finished coating for aluminum gutter coil.

 The aluminum used is alloy 3105-H24 which meets the specifications set forth in the “Aluminum Standards and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the gutter is.027, plus or minus.002.

 The surface of the aluminum sheet is thoroughly cleaned and dried to remove The surface of the aluminum sheet is thoroughly cleaned and dried to remove residual oils and impurities using a 140°F-160°F hot water solution of potassium hydroxide provided by Henkel Surface Technologies and then applying a chromate or titanium base conversion coating, 1402W or 1455SF by Henkel Surface Technologies  A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating.

The reverse side of the coil, or wash coat, is a thermo setting polyester enamel applied to help resist corrosion and promote formability.

 The color range of the applied finish is.8 mils, plus or minus.1 mils (.7-.9)  Made in the USA  The physical test used on our coated panels includes:

180 degree-2T bend flex test no tape off using Scotch Brand #610 tape (ASTM D-4145-83) Reverse impact –2 lbs./mil no tape off in positive direction using Scotch Brand #610 tape (ASTM D-4146-83) Pencil Hardness-F minimum using Eagle Turquoise Brand pencil (ASTM D-3363-92A) M.E.K. resistance - 100 double rubs using cheesecloth-mesh size 28 x 24 (ASTM D-5402-92) Dry Heat flexibility – no tape off on 2T bend after 2minutes at 160 degrees F

–  –  –

Listed below are the specifications on the paint, metal preparation, and finished coating for aluminum gutter coil.

 The aluminum used is alloy 3105-H24 which meets the specifications set forth in the “Aluminum Standards and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the gutter is.032, plus or minus.002.





 The surface of the aluminum sheet is thoroughly cleaned and dried to remove residual oils and impurities using a 140°F-160°F hot water solution of potassium hydroxide provided by Henkel Surface Technologies and then applying a chromate or titanium base conversion coating, 1402W or 1455SF by Henkel Surface Technologies.

 A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating.

The reverse side of the coil, or wash coat, is a thermo setting polyester enamel applied to help resist corrosion and promote formability.

 The color range of the applied finish is.8 mils, plus or minus.1 mils (.7-.9)  Made in the USA  The physical test used on our coated panels includes:

180 degree-2T bend flex test no tape off using Scotch Brand #610 tape (ASTM D-4145-83) Reverse impact –2 lbs./mil no tape off in positive direction using Scotch Brand #610 tape (ASTM D-4146-83) Pencil Hardness-F minimum using Eagle Turquoise Brand pencil (ASTM D-3363-92A) M.E.K. resistance - 100 double rubs using cheesecloth-mesh size 28 x 24 (ASTM D-5402-92) Dry Heat flexibility – no tape off on 2T bend after 2minutes at 160 degrees F 180 degree-2T tale, Scotch Brand #610

–  –  –

Listed below are the specifications on the paint, metal preparation, and finished coating for aluminum gutter coil.

 The aluminum used is alloy 3105-H24 which meets the specifications set forth in the “Aluminum Standards and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the gutter is.027, plus or minus.002.

 The surface of the aluminum sheet is thoroughly cleaned and dried to remove residual oils and impurities using a 140°F-160°F hot water solution of potassium hydroxide provided by Henkel Surface Technologies and then applying a chromate or titanium base conversion coating, 1402W or 1455SF by Henkel Surface Technologies.

 A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating.

The reverse side of the coil, or wash coat, is a thermo setting polyester enamel applied to help resist corrosion and promote formability.

 The color range of the applied finish is.8 mils, plus or minus.2 mils (1.0)  Made in the USA  The physical test used on our coated panels includes:

180 degree-2T bend flex test no tape off using Scotch Brand #610 tape (ASTM D-4145-83) Reverse impact –2 lbs./mil no tape off in positive direction using Scotch Brand #610 tape (ASTM D-4146-83) Pencil Hardness-F minimum using Eagle Turquoise Brand pencil (ASTM D-3363-92A) M.E.K. resistance - 100 double rubs using cheesecloth-mesh size 28 x 24 (ASTM D-5402-92)

–  –  –

Specifications on the paint, metal preparation, and finish coating for aluminum downspout coil:

The aluminum used is alloy 3105-H25 which meets the specifications set forth in the “Aluminum Standards and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the pipe is.019, plus or minus.002.

The surface of the aluminum sheet is thoroughly cleaned and dried to remove residual oils and impurities using a 140°F-160°F hot water solution of potassium hydroxide provided by Henkel Surface Technologies and then applying a chromate or titanium base conversion coating, 1402W or 1455SF by Henkel Surface Technologies A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating.

The reverse side of the coil, or wash coat, is a thermo setting polyester enamel applied to help resist corrosion and promote formability.

The color range of the applied finish is.8 mils, plus or minus.2 mils. (1.0) The physical test used on our coated panels includes 180 degree-2T bend flex test no tape off using Scotch Brand #610 tape (ASTM D-4145-83) Reverse impact –2 lbs./mil no tape off in positive direction using Scotch Brand #610 tape (ASTM D-4146-83) Pencil Hardness-F minimum using Eagle Turquoise Brand pencil (ASTM D-3363-92A) M.E.K. resistance - 100 double rubs using cheesecloth-mesh size 28 x 24 (ASTM D-5402-92) Dry Heat flexibility – no tape off on 2T bend after 2minutes at 160 degrees F

Specifications on the paint, metal preparation, and finish coating for aluminum downspout coil:

The aluminum used is alloy 3105-H24 which meets the specifications set forth in the “Aluminum Standards and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the pipe is.027, plus or minus.002.

The surface of the aluminum sheet is thoroughly cleaned and dried to remove residual oils and impurities using a 140°F-160°F hot water solution of potassium hydroxide provided by Henkel Surface Technologies and then applying a chromate or titanium base conversion coating, 1402W or 1455SF by Henkel Surface Technologies A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating.

The reverse side of the coil, or wash coat, is a thermo setting polyester enamel applied to help resist corrosion and promote formability.

The color range of the applied finish is.8 mils, plus or minus.2 mils. (1.0) The physical test used on our coated panels includes 180 degree-2T bend flex test no tape off using Scotch Brand #610 tape (ASTM D-4145-83) Reverse impact –2 lbs./mil no tape off in positive direction using Scotch Brand #610 tape (ASTM D-4146-83) Pencil Hardness-F minimum using Eagle Turquoise Brand pencil (ASTM D-3363-92A) M.E.K. resistance - 100 double rubs using cheesecloth-mesh size 28 x 24 (ASTM D-5402-92) Dry Heat flexibility – no tape off on 2T bend after 2minutes at 160 degrees F

Specifications on the paint, metal preparation, and finish coating for aluminum downpipe coil:

The aluminum used is alloy 3105-H25 which meets the specifications set forth in the “Aluminum Standards and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the pipe is.019, plus or minus.002.

The surface of the aluminum sheet is thoroughly cleaned and dried to remove residual oils and impurities using a 140°F-160°F hot water solution of potassium hydroxide provided by Henkel Surface Technologies and then applying a chromate or titanium base conversion coating, 1402W or 1455SF by Henkel Surface Technologies.

A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating.

The reverse side of the coil, or wash coat, is a thermo setting polyester enamel applied to help resist corrosion and promote formability.

The color range of the applied finish is.8 mils, plus or minus.2 mils. (1.0) The physical test used on our coated panels includes 180 degree-2T bend flex test no tape off using Scotch Brand #610 tape (ASTM D-4145-83) Reverse impact –2 lbs./mil no tape off in positive direction using Scotch Brand #610 tape (ASTM D-4146-83) Pencil Hardness-F minimum using Eagle Turquoise Brand pencil (ASTM D-3363-92A) M.E.K. resistance - 100 double rubs using cheesecloth-mesh size 28 x 24 (ASTM D-5402-92) Dry Heat flexibility – no tape off on 2T bend after 2minutes at 160 degrees F Specifications on the paint, metal preparation, and finish coating for aluminum

downpipe coil:

The aluminum used is alloy 3105-H24 which meets the specifications set forth in the “Aluminum Standards and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the pipe is.024, plus or minus.002.

The surface of the aluminum sheet is thoroughly cleaned and dried to remove impurities and coated with Betz Metchum Permatreat 1500/3000 non-cyanide chromate conversion coating.

A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating. The reverse side of the coil, or wash coat, is a thermo setting polyester enamel applied to help resist corrosion.

The color range of the applied finish is.8 mils, plus or minus.2 mils. (1.0) The physical test used on our coated panels includes

–  –  –

Specifications on the paint, metal preparation, and finish coating for aluminum elbow coil:

The aluminum used is alloy 3105-H25 which meets the specifications set forth in the “Aluminum Standards and Data 1988” published by the Aluminum Association. The gauge of the aluminum for the elbow is.019, plus or minus.002.

The surface of the aluminum sheet is thoroughly cleaned and dried to remove The surface of the aluminum sheet is thoroughly cleaned and dried to remove residual oils and impurities using a 140°F-160°F hot water solution of potassium hydroxide provided by Henkel Surface Technologies and then applying a chromate or titanium base conversion coating, 1402W or 1455SF by Henkel Surface Technologies.

A thermo setting polyester enamel is roller coated and baked at high temperatures for the outside coating.



Pages:   || 2 |


Similar works:

«Nutrients 2014, 6, 3431-3450; doi:10.3390/nu6093431 OPEN ACCESS nutrients ISSN 2072-6643 www.mdpi.com/journal/nutrients Review The Role of Sweet Taste in Satiation and Satiety Yu Qing Low, Kathleen Lacy † and Russell Keast †,* Centre for Physical Activity and Nutrition Research, School of Exercise and Nutrition Sciences, Deakin University, Burwood, Victoria 3125, Australia; E-Mails: yqlow@deakin.edu.au (Y.Q.L.); katie.lacy@deakin.edu.au (K.L.) † These authors contributed equally to this...»

«Assessment Report on EU-wide Pandemic Vaccine Strategies 25 August 2010 Final Version 1 of 117 Assessment Report on EU-wide Pandemic Vaccine Strategies Health Protection Agency Emergency Response Division Porton Down Salisbury SP4 0JG United Kingdom Tel: +44 (0)1980 612956 Fax: +44 (0)1980 612968 www.hpa.org.uk CRISMART Swedish National Defence College Drottning Kristinasvägen 37 115 93 Stockholm Sweden Tel: +46 (8)5534 2595 Fax: +46 (8)5534 2700 www.crismart.org Writing and Analysis Team...»

«2 Toe-Up Socks Tutorial http://www.cometosilver.com/socks/printready/2mlsocksprint.htm Two Toe-Up Socks on one Circular Needle A sock knitting tutorial by Kristin www.cometosilver.com/socks Read this first! This tutorial is for the knitter who has sucessfully knit at least one pair of socks before, and has a fair bit of prior knitting experience. If you've never knit a sock before, I HIGHLY recommend you go back and choose an easier tutorial. Knitting two socks at one time can quickly become...»

«Home Assessment Validation and Entry System (HAVEN) System Reference Manual Version 10.2 October 1, 2010 Contents OVERVIEW Introduction Conventions QUICK START Installation and Start Up Hardware/Software Install the Home Assessment Validation and Entry (HAVEN) System Application Help Log In User IDs HAVEN Patches Database Maintenance SYSTEM SETUP Maintain Agency Database Agency Information Agent Information Maintain Branch Database Maintain Employee Database Maintain Patient Database Enable...»

«THE PRACTICE OF THE FIRST THREE PERFECTIONS There are five headings under which each perfection [Skt: paramita] can be considered: 1. The meaning of the perfection 2. How to practice the perfection 3. The divisions of the perfection 4. What should be done in the practice of the perfection 5. The conclusion A. CHARITY 1. THE MEANING OF CHARITY Practicing charity (generosity, giving) means having the will to dedicate our body, possessions and merits to others and making the actions of body and...»

«K.L Reich / La veu de Joaquim Amat-Piniella Projecte Manresa Mauthausen Pels camins de la Deportacio Bagenca Guia de viatge / Deportació Bagenca, Catalana i Espanyola  Presentació del Projecte Manresa Mauthausen  El viatge com a eina pedagògica 1. Introducció 2. Biografia de Joaquim Amat-Piniella 3. La construcció de la memòria 4. Viatge vers la destrucció de la dignitat 5. Els espais d’esclavitud i mort: Camp de Mauthausen, Castell de Harteim, Camp de Gusen i Camp d’Ebensee...»

«Niemann, Crystal & Grobler: Integrated Marketing Communication (IMC) 21 and the role of Public Relations (PR) therein: a case study of University X I Niemann A Crystal AF Grobler Integrated Marketing Communication (IMC) and the role of Public Relations (PR) therein: a case study of University X ABSTRACT This study determines the role of public relations as a marketing communication function in University X’s integrated marketing communication approach. The research topic was selected for...»

«Heteroatom Containing Polycyclic Aromatic Hydrocarbons with Positive Charge Synthesis and Characterization Dissertation zur Erlangung des Grades “Doktor der Naturwissenschaften” dem Fachbereich Chemie und Pharmazie der Johannes Gutenberg-Universität Mainz vorgelegt von Dongqing Wu geboren in Henan Province / P. R. China Mainz, 2008 Decan: Herr Prof. Dr.1. Berichterstatter: Herr Prof. Dr.2. Berichterstatter: Herr Prof. Dr.Tag der mündlichen Prüfung: Die vorliegende Arbeit wurde in der...»

«Minimizing temperature sensitivity of silicon Mach-Zehnder interferometers Biswajeet Guha, Alexander Gondarenko and Michal Lipson Department of Electrical and Computer Engineering, Cornell University, Ithaca 14853, NY ml292@cornell.edu Abstract: We present a novel design approach for integrated Mach-Zehnder interferometers to minimize their temperature sensitivity and demonstrate, for the first time, near zero spectral shifts with temperature (~0.005 nm/K) in these devices. This could lead to...»

«SAMMIE CHOY The Opera House and the Orpheum: Elite and Popular Theater in Early 20th-century Hawai'i HONOLULU HAD TWO MAIN theatrical venues in igoo: the Hawaiian Opera House and the Orpheum Theatre. Local amateur actors and musicians were produced in the two venues, and itinerant theater companies had been making the arduous ocean voyage to perform in Honolulu since the mid-19th century. The Opera House was considered the elite venue, and the Orpheum the city's popular play house. The...»

«ABSTRACT Title of Dissertation: Community journalism as ritual: A case study of community and weekly newspapers in Laurel, Maryland Lindsey Lee Wotanis, Ph.D., 2011 Directed By: Dr. Linda Steiner Professor/Director of Doctoral Studies Philip Merrill College of Journalism University of Maryland, College Park This dissertation is a study of the intersection of community and community journalism in Laurel, an area with just over 100,000 residents in central Maryland. The case study utilizes...»

«Sermon #1586 Metropolitan Tabernacle Pulpit 1 HOLY LONGINGS NO. 1586 A SERMON DELIVERED ON LORD’S-DAY MORNING, FEBRUARY 27, 1881, BY C. H. SPURGEON, AT THE METROPOLITAN TABERNACLE, NEWINGTON. “My soul breaks with longing for Your judgments at all times.” Psalm 119:20. ONE of the best tests of a man’s character will be found in his deepest and heartiest longings. You cannot always judge a man by what he is doing at any one time, for he may be under constraints which compel him to act...»





 
<<  HOME   |    CONTACTS
2016 www.dissertation.xlibx.info - Dissertations, online materials

Materials of this site are available for review, all rights belong to their respective owners.
If you do not agree with the fact that your material is placed on this site, please, email us, we will within 1-2 business days delete him.